SZ Series Conical Ugboro abụọ-Screw Gearbox

Nkọwa dị mkpirikpi:

SZ usoro gearbox maka ejima conical-screw extruder bụ ngalaba ịnya ụgbọ ala pụrụ iche dabara na ejima conical-mkpọpu mkpanaka conical. Ọ nwere akụkụ abụọ, ya bụ, igbe mbelata na igbe nkesa. Mgbe ibelata ọsọ na ịba ụba nke moto, ọ na-ewepụta ihe ebumnobi ike ...

Nkọwa ngwaahịa

Mkpado ngwaahịa

Ozi bụ isi

Ike ntinye 18.5KW ~ 110KW
Screw Dia 45-92 mm
Ọkpụkpụ mpụta nke otu aro 1972N · m ~ 13130N · m
Ntinye ọsọ 1500RPM
Ọsọ mmepụta Dabere na oke
Ngwa akụrụngwa 20CrMnTi obere carbon alloy ígwè
Ihe eji eme ụlọ Nkedo ígwè
Nhazi akụrụngwa CNC egweri
Ụdị bearings C&U, NXZ‌, ZHJ, ZWZ, LYC, HRB, NSK, FAG, wdg
Ụdị akara mmanụ FAG, NAK, wdg
Ịdị ike nke ngwa ngwa HRC54-62
Gear izi ezi Nkeji 6
Ọgwụgwọ okpomọkụ Carburizing, Quenching
Ụdị mmepụta Mwepụta osisi spline
Ụdị ntinye Shaft siri ike

Nkọwa ngwaahịa
SZ usoro gearbox maka ejima conical-screw extruder bụ ngalaba ịnya ụgbọ ala pụrụ iche dabara na ejima conical-mkpọpu mkpanaka conical. Ọ nwere akụkụ abụọ, ya bụ, igbe mbelata na igbe nkesa. Mgbe ibelata ọsọ na ịba ụba nke moto ahụ, ọ na-ewepụta ike ebumnobi na igbe nkesa, wee na-ebugharị ogwe mmepụta abụọ (akụkụ agụnyere na nke ejima - mkpara ịghasa) site na otu ụzọ obere conical spiral gears na-akwọ ụgbọ ala nke 1: 1, si otú a na-akwọ ụgbọala mkpara iji tụgharịa n'èzí na ntụziaka dị iche iche.

Ngwaahịa Njirimara

1.There bụ involute cylindrical gearbox, nke data na Ọdịdị na-opimally mere site na kọmputa.

2.The gia na-mere nke top - àgwà elu ike ala carbon alloy ígwè mgbe carbon penetrating, quench na ezé egweri. Ọ nwere nnukwu ike ike n'elu ezé, ikike ibu ibu, obere mkpọtụ, ọrụ dị nro na ịrụ ọrụ ịkwọ ụgbọala dị elu.

3.The ihe nkesa igbe bụ nodular graphite nkedo ígwè na gia nwere elu - ike n'ala ezé, nke agwọ - ekara jụrụ mmiri ọkpọkọ na-ekesa.

4.The kacha ọsọ ọsọ nke gearbox na-adịkarịghị ibu karịa 1500 rpm.

5.The okpomọkụ na-arụ ọrụ gburugburu ebe obibi bụ -10 ℃-45 ℃.Mgbe okpomọkụ bụ ala karịa 0℃, na mmanu mmanụ kwesịrị preheated ka + 10 ℃ tupu ịmalite.

Nka nka

Ụdị Screw Dia (mm) Oke ịnya ụgbọ ala Ọsọ ntinye (r/min) Ike ntinye (KW)
SZ45 45 33.48 1500 18.5
SZ50 50 39.68 1500 22
SZ55 55 40.00 1500 30
SZ65 65 38.23 1500 37
SZ80 80 38.77 1500 55
SZ92 92 40.47 1500 110

Ngwa
A na-eji igbe igbe usoro SZ eme ihe n'ọtụtụ ebe na ejima conical plastik - ihe nkedo extruders.

FAQ

Ajụjụ: Otu esi ahọrọ a igbe igbe nagia ọsọ mbelata?

A: Ị nwere ike na-ezo aka na katalọgụ anyị ịhọrọ nkọwapụta ngwaahịa ma ọ bụ anyị nwekwara ike ịkwado ihe nlereanya na nkọwapụta mgbe ị nyechara ike moto achọrọ, ọsọ mmepụta na oke ọsọ, wdg.

Ajụjụ: Kedu ka anyị ga-esi kwe nkwangwaahịaàgwà?
A: Anyị nwere usoro njikwa usoro mmepụta siri ike ma nwalee akụkụ ọ bụla tupu nnyefe.Anyị gia igbe reducer ga-emekwa kwekọrọ ekwekọ ọrụ ule mgbe echichi, na-enye ule akụkọ. Nkwakọ ngwaahịa anyị dị n'ụdị osisi pụrụ iche maka mbupụ iji hụ na ịdị mma nke njem.
Q: Gịnị kpatara m ji ahọrọ ụlọ ọrụ gị?
A: a) Anyị bụ otu n'ime ndị na-emepụta ihe na ndị na-ebupụ ngwá ọrụ nnyefe ngwa ngwa.
b) Ụlọ ọrụ anyị emeela ngwaahịa gia maka ihe dị ka afọ 20 ọzọ na ahụmahụ bara ụbana teknụzụ dị elu.
c) Anyị nwere ike ịnye ọrụ kachasị mma na ọrụ kachasị mma na ọnụahịa asọmpi maka ngwaahịa.

Ajụjụ: Gịnị bụnke gị MOQ nausoro nkeịkwụ ụgwọ?

A: MOQ bụ otu unit.T / T na L / C na-anabata, na ndị ọzọ okwu nwekwara ike kpakorita.

Ajụjụ: Ị nwere ike ịnye akwụkwọ ndị dị mkpa maka ngwongwo?

A:Ee, anyị nwere ike ịnye ọtụtụ akwụkwọ gụnyere akwụkwọ ntuziaka onye ọrụ, akụkọ nnwale, akụkọ nyocha nke ọma, mkpuchi mbupu, akwụkwọ ikike izizi, ndepụta nkwakọ ngwaahịa, akwụkwọ ọnụahịa azụmaahịa, ụgwọ mbupu na akwụkwọ mbupụ ndị ọzọ.

 

 

 

  • Nke gara aga:
  • Na-esote:
    • igbe igbe conical gearbox

    Ụdị ngwaahịa

    Pịa tinye ka ịchọọ ma ọ bụ ESC mechie

    Hapụ Ozi Gị